The automatic LoPro includes all features as detailed further above with the additional benefit of automatic operation in multiple modes- NO float switch is required.
High or low water sensing mode - the pump can be set to start operation at either 33mm or 50mm bilge water height
Electronic automatic timer mode - The pump can be set to automatically check for water every 2 1/2 minutes - if water is present it will continue to run and pump bilge water. This feature is very handy - however if you leave the boat unattended on a mooring it may run down the battery over time, if you don’t have solar panels or a wind generator Etc to constantly charge the battery - in this case set the pump only to high or low mode
Includes pump test mode
Includes manual over-ride 3rd wire - requires a Rule 3 way panel switch RWB23 or 107 to operate this feature - see next page
12 volt 4 amp use a 7.5 amp fuse 12 volt DC only - DO NOT run direct off a 240v-12v transformer
CONVERSION OPTIONS
As your needs change - a child wants a new bed, or maybe a sibling arrives - the bed can keep up with the new needs.
Choose the bed you want to convert and see the conversion options in the bed converter.
We guarantee a five-year availability of the standard conversion kits for all convertible beds from the date of purchase.
SAFETY AND COMPLIANCE
Tested and approved according to safety standard EN 747-1:2012+A1:2015.
According to EN 747 loft beds and the upper bed of bunk beds are not suitable for children under 6 years due to the risk of injury from falls.
A smaller child can sleep in the lower bed of bunk beds, possibly with a bed guard for extra safety.